Nuclear waste videos and info

Radioactive wastes are waste types containing radioactive chemical elements that do not have a practical purpose. They are usually the products of nuclear processes, such as nuclear fission. However, industries not directly connected to the nuclear industry may produce large quantities of radioactive waste. The majority of radioactive waste is "low-level waste", meaning it contains low levels of radioactivity per mass or volume. This type of waste often consists of used protective clothing, which is only slightly contaminated but still dangerous in case of radioactive contamination of a human body through ingestion, inhalation, absorption, or injection.

The issue of disposal methods for nuclear waste was one of the most pressing current problems the international nuclear industry faced when trying to establish a long term energy production plan, yet there was hope it could be safely solved. A recent research report on the Nuclear Industry perspective of the current state of scientific knowledge in predicting the extent that waste would find its way from the deep burial facility - back to soil and drinking water (such that it presents a direct threat to the health of human beings - as well as to other forms of life) is presented in a document from the IAEA (The International Atomic Energy Agency) - published in October 2007. This document states "The capacity to model all the effects involved in the dissolution of the waste form, in conditions similar to the disposal site, is the final goal of all the research undertaken by many research groups over many years. As we will see in this report, this kind of investigation is far from being finished."^[1] In the United States, DOE acknowledges progress in addressing the waste problems of the industry, and successful remediation of some contaminated sites, yet also major uncertainties and sometimes complications and setbacks in handling the issue properly, cost effectively, and in the projected time frame.^[2] In other countries with lower ability or will to maintain environmental integrity the issue would be even more problematic.

In the United States alone, the Department of Energy states there are "millions of gallons of radioactive waste" as well as "thousands of tons of spent nuclear fuel and material" and also "huge quantities of contaminated soil and water."^[2] Despite copious quantities of waste, the DOE has stated a goal of cleaning all presently contaminated sites successfully by 2025.^[2] The Fernald, Ohio site for example had "31 million pounds of uranium product", "2.5 billion pounds of waste", "2.75 million cubic yards of contaminated soil and debris", and a "223 acre portion of the underlying Great Miami Aquifer had uranium levels above drinking standards."^[2] The United States has at least 108 sites designated as areas that are contaminated and unusable, sometimes many thousands of acres.^[3]^[2] DOE wishes to clean or mitigate many or all by 2025, however the task can be difficult and it acknowledges that some will never be completely remediated. In just one of these 108 larger designations, Oak Ridge National Laboratory, there were for example at least "167 known contaminant release sites" in one of the three subdivisions of the 37,000-acre (150 km²) site.^[2] Some of the U.S. sites were smaller in nature, however, cleanup issues were simpler to address, and DOE has successfully completed cleanup, or at least closure, of several sites.^[2]

The nature and significance of radioactive waste

Radioactive waste typically comprises a number of radioisotopes: unstable configurations of elements that decay, emitting ionizing radiation which can be harmful to human health and to the environment. Those isotopes emit different types and levels of radiation, which last for different periods of time..

Physics

The radioactivity of all nuclear waste diminishes with time. All radioisotopes contained in the waste have a half-life - the time it takes for any radionuclide to lose half of its radioactivity and eventually all radioactive waste decays into non-radioactive elements. Certain radioactive elements (such as plutonium-239) in “spent” fuel will remain hazardous to humans and other living beings for hundreds of thousands of years. Other radioisotopes will remain hazardous for millions of years. Thus, these wastes must be shielded for centuries and isolated from the living environment for hundreds of millennia.^[4] Some elements, such as Iodine-131, have a short half-life (around 8 days in this case) and thus they will cease to be a problem much more quickly than other, longer-lived, decay products but their activity is much greater initially. The two tables show some of the major radioisotopes, their half-lives, and their radiation yield as a proportion of the yield of fission of Uranium-235.

The faster a radioisotope decays, the more radioactive it will be. The energy and the type of the ionizing radiation emitted by a pure radioactive substance are important factors in deciding how dangerous it will be. The chemical properties of the radioactive element will determine how mobile the substance is and how likely it is to spread into the environment and contaminate human bodies. This is further complicated by the fact that many radioisotopes do not decay immediately to a stable state but rather to a radioactive decay product leading to decay chains.

Pharmacokinetics

Exposure to high levels of radioactive waste may cause serious harm or death. Treatment of an adult animal with radiation or some other mutation-causing effect, such as a cytotoxic anti-cancer drug, may cause cancer in the animal. In humans it has been calculated that a 5 sievert dose is usually fatal, and the lifetime risk of dying from radiation induced cancer from a single dose of 0.1 sieverts is 0.8%, increasing by the same amount for each additional 0.1 sievert increment of dosage.^[5] Ionizing radiation causes deletions in chromosomes.^[6] If a developing organism such as an unborn child is irradiated, it is possible a birth defect may be induced, but it is unlikely this defect will be in a gamete or a gamete forming cell. The incidence of radiation-induced mutations in humans is undetermined, due to flaws in studies done to date. ^[7]

Depending on the decay mode and the pharmacokinetics of an element (how the body processes it and how quickly), the threat due to exposure to a given activity of a radioisotope will differ. For instance Iodine-131 is a short-lived beta and gamma emitter but because it concentrates in the thyroid gland, it is more able to cause injury than cesium-137 which, being water soluble, is rapidly excreted in urine. In a similar way, the alpha emitting actinides and radium are considered very harmful as they tend to have long biological half-lives and their radiation has a high linear energy transfer value. Because of such differences, the rules determining biological injury differ widely according to the radioisotope, and sometimes also the nature of the chemical compound which contains the radioisotope.

Goals of waste management

The main objective in managing and disposing of radioactive (or other) waste is to protect people and the environment. This means isolating or diluting the waste so that the rate or concentration of any radionuclide returned to the biosphere is harmless. To achieve this the preferred technology to date has been deep and secure burial for the more dangerous wastes; transmutation, long-term retrievable storage, and removal to space have also been suggested. Management options for waste are discussed below.

Radioactivity by definition reduces over time, so in principle the waste needs to be isolated for a particular period of time until its components have decayed such that it no longer poses a threat. In practice this can mean periods of hundreds of thousands of years, depending on the nature of the waste involved.

Though an affirmative answer is often taken for granted, the question as to whether or not we should endeavor to avoid causing harm to remote future generations, perhaps thousands upon thousands of years hence, is essentially one which must be dealt with by philosophy.

Sources of waste

Radioactive waste comes from a number of sources. The majority of waste originates from the nuclear fuel cycle and nuclear weapons reprocessing. However, other sources include medical and industrial wastes, as well as naturally occurring radioactive materials (NORM) that can be concentrated as a result of the processing or consumption of coal, oil and gas, and some minerals, as discussed below.

Nuclear fuel cycle

Front end

Waste from the front end of the nuclear fuel cycle is usually alpha emitting waste from the extraction of uranium. It often contains radium and its decay products.

Uranium dioxide (UO₂) concentrate from mining is not very radioactive - only a thousand or so times as radioactive as the granite used in buildings. It is refined from yellowcake (U₃O₈), then converted to uranium hexafluoride gas (UF₆). As a gas, it undergoes enrichment to increase the U-235 content from 0.7% to about 4.4% (LEU). It is then turned into a hard ceramic oxide (UO₂) for assembly as reactor fuel elements.

The main by-product of enrichment is depleted uranium (DU), principally the U-238 isotope, with a U-235 content of ~0.3%. It is stored, either as UF₆ or as U₃O₈. Some is used in applications where its extremely high density makes it valuable, such as the keels of yachts, and anti-tank shells.^[8] It is also used (with recycled plutonium) for making mixed oxide fuel (MOX) and to dilute highly enriched uranium from weapons stockpiles which is now being redirected to become reactor fuel. This dilution, also called downblending, means that any nation or group that acquired the finished fuel would have to repeat the (very expensive and complex) enrichment process before assembling a weapon.

Back end

It is important to distinguish the processing of uranium to make fuel from the reprocessing of used fuel. Used fuel contains the highly radioactive products of fission (see high level waste below). Many of these are neutron absorbers, called neutron poisons in this context. These eventually build up to a level where they absorb so many neutrons that the chain reaction stops, even with the control rods completely removed. At that point the fuel has to be replaced in the reactor with fresh fuel, even though there is still a substantial quantity of uranium-235 and plutonium present. In the United States, this used fuel is stored, while in countries such as the United Kingdom, France, and Japan, the fuel is reprocessed to remove the fission products, and the fuel can then be re-used. This reprocessing involves handling highly radioactive materials, and the fission products removed from the fuel are a concentrated form of high-level waste as are the chemicals used in the process.

Proliferation concerns

When dealing with uranium and plutonium, the possibility that they may be used to build nuclear weapons is often a concern. Active nuclear reactors and nuclear weapons stockpiles are very carefully safeguarded and controlled. However, high-level waste from nuclear reactors may contain plutonium. Ordinarily, this plutonium is reactor-grade plutonium, containing a mixture of plutonium-239 (highly suitable for building nuclear weapons), plutonium-240 (an undesirable contaminant and highly radioactive), plutonium-241, and plutonium-238; these isotopes are difficult to separate. Moreover, high-level waste is full of highly radioactive fission products. However, most fission products are relatively short-lived. This is a concern since if the waste is stored, perhaps in deep geological storage, over many years the fission products decay, decreasing the radioactivity of the waste and making the plutonium easier to access. Moreover, the undesirable contaminant Pu-240 decays faster than the Pu-239, and thus the quality of the bomb material increases with time (although its quantity decreases during that time as well). Thus, some have argued, as time passes, these deep storage areas have the potential to become "plutonium mines", from which material for nuclear weapons can be acquired with relatively little difficulty. Critics of the latter idea point out that the half-life of Pu-240 is 6,560 years and Pu-239 is 24,110 years, and thus the relative enrichment of one isotope to the other with time occurs with a half-life of 9,000 years (that is, it takes 9000 years for the fraction of Pu-240 in a sample of mixed plutonium isotopes, to spontaneously decrease by half—a typical enrichment needed to turn reactor-grade into weapons-grade Pu). Thus "weapons grade plutonium mines" would be a problem for the very far future (>9,000 years from now), so that there remains a great deal of time for technology to advance to solve this problem, before it becomes acute.

Pu-239 decays to U-235 which is suitable for weapons and which has a very long half life (roughly 10⁹ years). Thus plutonium may decay and leave uranium-235. However, modern reactors are only moderately enriched with U-235 relative to U-238, so the U-238 continues to serve as denaturation agent for any U-235 produced by plutonium decay.

One solution to this problem is to recycle the plutonium and use it as a fuel e.g. in fast reactors. But in the minds of some, the very existence of the nuclear fuel reprocessing plant needed to separate the plutonium from the other elements represents a proliferation concern. In pyrometallurgical fast reactors, the waste generated is an actinide compound that cannot be used for nuclear weapons.

Nuclear weapons reprocessing

Waste from nuclear weapons reprocessing (as opposed to production, which requires primary processing from reactor fuel) is unlikely to contain much beta or gamma activity other than tritium and americium. It is more likely to contain alpha emitting actinides such as Pu-239 which is a fissile material used in bombs, plus some material with much higher specific activities, such as Pu-238 or Po.

In the past the neutron trigger for a bomb tended to be beryllium and a high activity alpha emitter such as polonium; an alternative to polonium is Pu-238. For reasons of national security, details of the design of modern bombs are normally not released to the open literature. It is likely however that a D-T fusion reaction in either an electrically driven device or a D-T fusion reaction driven by the chemical explosives would be used to start up a modern device.

Some designs might well contain a radioisotope thermoelectric generator using Pu-238 to provide a longlasting source of electrical power for the electronics in the device.

It is likely that the fissile material of an old bomb which is due for refitting will contain decay products of the plutonium isotopes used in it, these are likely to include U-236 from Pu-240 impurities, plus some U-235 from decay of the Pu-239; however, due to the relatively long half-life of these Pu isotopes, these wastes from radioactive decay of bomb core material would be very small, and in any case, far less dangerous (even in terms of simple radioactivity) than the Pu-239 itself.

The beta decay of Pu-241 forms Am-241; the in-growth of americium is likely to be a greater problem than the decay of Pu-239 and Pu-240 as the americium is a gamma emitter (increasing external-exposure to workers) and is an alpha emitter which can cause the generation of heat. The plutonium could be separated from the americium by several different processes; these would include pyrochemical processes and aqueous/organic solvent extraction. A truncated PUREX type extraction process would be one possible method of making the separation.

Medical

Radioactive medical waste tends to contain beta particle and gamma ray emitters. It can be divided into two main classes. In diagnostic nuclear medicine a number of short-lived gamma emitters such as technetium-99m are used. Many of these can be disposed of by leaving it to decay for a short time before disposal as normal trash. Other isotopes used in medicine, with half-lives in parentheses:

Industrial

Industrial source waste can contain alpha, beta, neutron or gamma emitters. Gamma emitters are used in radiography while neutron emitting sources are used in a range of applications, such as oil well logging.[1]

Naturally occurring radioactive material (NORM)

Processing of substances containing natural radioactivity; this is often known as NORM. A lot of this waste is alpha particle-emitting matter from the decay chains of uranium and thorium. The main source of radiation in the human body is potassium-40 (⁴⁰K). There is a natural background radioactivity that life systems are built to resist. Most rocks, due to their components, have a certain, but low level, of radioactivity.

Coal

Coal contains a small amount of radioactive uranium, barium, thorium and potassium, but, in the case of pure coal, this is significantly less than the average concentration of those elements in the Earth's crust. However, the surrounding strata, if shale or mudstone, often contains slightly more than average and this may also be reflected in the ash content of 'dirty' coals^[9].^[10] The more active ash minerals become concentrated in the fly ash precisely because they do not burn well.^[10] However, the radioactivity of fly ash is still very low. It is about the same as black shale and is less than phosphate rocks, but is more of a concern because a small amount of the fly ash ends up in the atmosphere where it can be inhaled.^[11]

Oil and gas

Residues from the oil and gas industry often contain radium and its daughters. The sulphate scale from an oil well can be very radium rich, while the water, oil and gas from a well often contains radon. The radon decays to form solid radioisotopes which form coatings on the inside of pipework. In an oil processing plant the area of the plant where propane is processed is often one of the more contaminated areas of the plant as radon has a similar boiling point as propane.^[12]

Types of radioactive waste

Although not significantly radioactive, uranium mill tailings are waste. They are byproduct material from the rough processing of uranium-bearing ore. They are sometimes referred to as 11(e)2 wastes, from the section of the U.S. Atomic Energy Act that defines them. Uranium mill tailings typically also contain chemically-hazardous heavy metals such as lead and arsenic. Vast mounds of uranium mill tailings are left at many old mining sites, especially in Colorado, New Mexico, and Utah.

Low level waste (LLW) is generated from hospitals and industry, as well as the nuclear fuel cycle. It comprises paper, rags, tools, clothing, filters, etc., which contain small amounts of mostly short-lived radioactivity. Commonly, LLW is designated as such as a precautionary measure if it originated from any region of an 'Active Area', which frequently includes offices with only a remote possibility of being contaminated with radioactive materials. Such LLW typically exhibits no higher radioactivity than one would expect from the same material disposed of in a non-active area, such as a normal office block. Some high activity LLW requires shielding during handling and transport but most LLW is suitable for shallow land burial. To reduce its volume, it is often compacted or incinerated before disposal. Low level waste is divided into four classes, class A, B, C and GTCC, which means "Greater Than Class C".

Intermediate level waste (ILW) contains higher amounts of radioactivity and in some cases requires shielding. ILW includes resins, chemical sludge and metal reactor fuel cladding, as well as contaminated materials from reactor decommissioning. It may be solidified in concrete or bitumen for disposal. As a general rule, short-lived waste (mainly non-fuel materials from reactors) is buried in shallow repositories, while long-lived waste (from fuel and fuel-reprocessing) is deposited in deep underground facilities. U.S. regulations do not define this category of waste; the term is used in Europe and elsewhere.

High level waste (HLW) is produced by nuclear reactors. It contains fission products and transuranic elements generated in the reactor core. It is highly radioactive and often thermally hot. LLW and ILW accounts for over 95% of the total radioactivity produced in the process of nuclear electricity generation. The amount of HLW worldwide is currently increasing by about 12,000 metric tons every year, which is the equivalent to about 100 double-decker busses or a two-story structure built on top of a basketball court.^[13]

Transuranic waste (TRUW) as defined by U.S. regulations is, without regard to form or origin, waste that is contaminated with alpha-emitting transuranic radionuclides with half-lives greater than 20 years, and concentrations greater than 100 nCi/g (3.7 MBq/kg), excluding High Level Waste. Elements that have an atomic number greater than uranium are called transuranic ("beyond uranium"). Because of their long half-lives, TRUW is disposed more cautiously than either low level or intermediate level waste. In the U.S. it arises mainly from weapons production, and consists of clothing, tools, rags, residues, debris and other items contaminated with small amounts of radioactive elements (mainly plutonium).

Under U.S. law, TRUW is further categorized into "contact-handled" (CH) and "remote-handled" (RH) on the basis of radiation dose measured at the surface of the waste container. CH TRUW has a surface dose rate not greater than 200 mrem per hour (2 mSv/h), whereas RH TRUW has a surface dose rate of 200 mrem per hour (2 mSv/h) or greater. CH TRUW does not have the very high radioactivity of high level waste, nor its high heat generation, but RH TRUW can be highly radioactive, with surface dose rates up to 1000000 mrem per hour (10000 mSv/h). The United States currently permanently disposes of TRUW generated from nuclear power plants and military facilities at the Waste Isolation Pilot Plant.^[14]

Management of waste

Of particular concern in nuclear waste management are two long-lived fission products, Tc-99 (half-life 220,000 years) and I-129 (half-life 17 million years), which dominate spent fuel radioactivity after a few thousand years. The most troublesome transuranic elements in spent fuel are Np-237 (half-life two million years) and Pu-239 (half life 24,000 years).^[15] Nuclear waste requires sophisticated treatment and management in order to successfully isolate it from interacting with the biosphere. This usually necessitates treatment, followed by a long-term management strategy involving storage, disposal or transformation of the waste into a non-toxic form.^[16] Governments around the world are considering a range of waste management and disposal options, though there has been limited progress toward long-term waste management solutions.^[17]

Initial treatment of waste

Vitrification

Long-term storage of radioactive waste requires the stabilization of the waste into a form which will not react, nor degrade, for extended periods of time. One way to do this is through vitrification. Currently at Sellafield the high-level waste (PUREX first cycle raffinate) is mixed with sugar and then calcined. Calcination involves passing the waste through a heated, rotating tube. The purposes of calcination are to evaporate the water from the waste, and de-nitrate the fission products to assist the stability of the glass produced.^[18]

The 'calcine' generated is fed continuously into an induction heated furnace with fragmented glass [2]. The resulting glass is a new substance in which the waste products are bonded into the glass matrix when it solidifies. This product, as a molten fluid, is poured into stainless steel cylindrical containers ("cylinders") in a batch process. When cooled, the fluid solidifies ("vitrifies") into the glass. Such glass, after being formed, is very highly resistant to water. ^[19]

After filling a cylinder, a seal is welded onto the cylinder. The cylinder is then washed. After being inspected for external contamination, the steel cylinder is stored, usually in an underground repository. In this form, the waste products are expected to be immobilized for a very long period of time (many thousands of years).^[20]

The glass inside a cylinder is usually a black glossy substance. All this work (in the United Kingdom) is done using hot cell systems. The sugar is added to control the ruthenium chemistry and to stop the formation of the volatile RuO₄ containing radio ruthenium. In the west, the glass is normally a borosilicate glass (similar to Pyrex), while in the former Soviet bloc it is normal to use a phosphate glass. The amount of fission products in the glass must be limited because some (palladium, the other Pt group metals, and tellurium) tend to form metallic phases which separate from the glass. In Germany a vitrification plant is in use; this is treating the waste from a small demonstration reprocessing plant which has since been closed down.^[21]^[22]

Ion exchange

It is common for medium active wastes in the nuclear industry to be treated with ion exchange or other means to concentrate the radioactivity into a small volume. The much less radioactive bulk (after treatment) is often then discharged. For instance, it is possible to use a ferric hydroxide floc to remove radioactive metals from aqueous mixtures [3]. After the radioisotopes are absorbed onto the ferric hydroxide, the resulting sludge can be placed in a metal drum before being mixed with cement to form a solid waste form.^[23] In order to get better long-term performance (mechanical stability) from such forms, they may be made from a mixture of fly ash, or blast furnace slag, and portland cement, instead of normal concrete (made with portland cement, gravel and sand).

Synroc

The Australian Synroc (synthetic rock) is a more sophisticated way to immobilize such waste, and this process may eventually come into commercial use for civil wastes (it is currently being developed for U.S. military wastes). Synroc was invented by the late Prof Ted Ringwood (a geochemist) at the Australian National University.^[24] The Synroc contains pyrochlore and cryptomelane type minerals. The original form of Synroc (Synroc C) was designed for the liquid high level waste (PUREX raffinate) from a light water reactor. The main minerals in this Synroc are hollandite (BaAl₂Ti₆O₁₆), zirconolite (CaZrTi₂O₇) and perovskite (CaTiO₃). The zirconolite and perovskite are hosts for the actinides. The strontium and barium will be fixed in the perovskite. The caesium will be fixed in the hollandite.

Long term management of waste

The timeframe in question when dealing with radioactive waste ranges from 10,000 to 1,000,000 years,^[25] according to studies based on the effect of estimated radiation doses.^[26] Researchers suggest that forecasts of health detriment for such periods should be examined critically.^[27] Practical studies only consider up to 100 years as far as effective planning^[28] and cost evaluations^[29] are concerned. Long term behaviour of radioactive wastes remains a subject for ongoing research projects.^[30]

Geologic disposal

The process of selecting appropriate deep final repositories for high level waste and spent fuel is now under way in several countries with the first expected to be commissioned some time after 2010. The basic concept is to locate a large, stable geologic formation and use mining technology to excavate a tunnel, or large-bore tunnel boring machines (similar to those used to drill the Chunnel from England to France) to drill a shaft 500–1,000 meters below the surface where rooms or vaults can be excavated for disposal of high-level radioactive waste. The goal is to permanently isolate nuclear waste from the human environment. However, many people remain uncomfortable with the immediate stewardship cessation of this disposal system, suggesting perpetual management and monitoring would be more prudent.

Because some radioactive species have half-lives longer than one million years, even very low container leakage and radionuclide migration rates must be taken into account.^[31] Moreover, it may require more than one half-life until some nuclear materials lose enough radioactivity to no longer be lethal to living things. A 1983 review of the Swedish radioactive waste disposal program by the National Academy of Sciences found that country’s estimate of several hundred thousand years—perhaps up to one million years—being necessary for waste isolation “fully justified.”^[32]

Storing high level nuclear waste above ground for a century or so is considered appropriate by many scientists. This allows the material to be more easily observed and any problems detected and managed, while decay of radionuclides over this time period significantly reduces the level of radioactivity and associated harmful effects to the container material. It is also considered likely that over the next century newer materials will be developed which will not break down as quickly when exposed to a high neutron flux, thus increasing the longevity of the container once it is permanently buried.

Sea-based options for disposal of radioactive waste^[33] include burial beneath a stable abyssal plain, burial in a subduction zone that would slowly carry the waste downward into the Earth's mantle, and burial beneath a remote natural or human-made island. While these approaches all have merit and would facilitate an international solution to the vexing problem of disposal of radioactive waste, they are currently not being seriously considered because of the legal barrier of the Law of the Sea and because in North America and Europe sea-based burial has become taboo from fear that such a repository could leak and cause widespread damage. Dumping of radioactive waste from ships has reinforced this concern, as has contamination of islands in the Pacific Ocean. However, sea-based approaches might come under consideration in the future by individual countries or groups of countries that cannot find other acceptable solutions.

Article 1 (Definitions), 7., of the 1996 Protocol to the Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter, (the London Dumping Convention) states:

The proposed land-based subductive waste disposal method disposes of nuclear waste in a subduction zone accessed from land,^[34] and therefore is not prohibited by international agreement. This method has been described as the most viable means of disposing of radioactive waste,^[35] and as the state-of-the-art in nuclear waste disposal technology.^[36] Another approach termed Remix & Return^[37] would blend high-level waste with uranium mine and mill tailings down to the level of the original radioactivity of the uranium ore, then replace it in inactive uranium mines. This approach has the merits of providing jobs for miners who would double as disposal staff, and of facilitating a cradle-to-grave cycle for radioactive materials. However, this approach would be inappropriate for spent reactor fuel in the absence of reprocessing, due to the presence in it of highly toxic radioactive elements such as plutonium.

Transmutation

There have been proposals for reactors that consume nuclear waste and transmute it to other, less-harmful nuclear waste. In particular, the Integral Fast Reactor was a proposed nuclear reactor with a nuclear fuel cycle that produced no transuranic waste and in fact, could consume transuranic waste. It proceeded as far as large-scale tests but was then canceled by the U.S. Government. Another approach, considered safer but requiring more development, is to dedicate subcritical reactors to the transmutation of the left-over transuranic elements.

Transmutation was banned in the United States on April 1977 by President Carter due to the danger of plutonium proliferation,^[38] but President Reagan rescinded the ban in 1981.^[39] Due to the economic losses and risks, construction of reprocessing plants during this time did not resume. Due to high energy demand, work on the method has continued in the EU. This has resulted in a practical nuclear research reactor called Myrrha in which transmutation is possible. Additionally, a new research program called ACTINET has been started in the EU to make transmutation possible on a large, industrial scale. According to President Bush's Global Nuclear Energy Partnership (GNEP) of 2007, the United States is now actively promoting research on transmutation technologies needed to markedly reduce the problem of nuclear waste treatment.^[40]

There have also been theoretical studies involving the use of fusion reactors as so called "actinide burners" where a fusion reactor plasma such as in a tokamak, could be "doped" with a small amount of the "minor" transuranic atoms which would be transmuted (meaning fissioned in the actinide case) to lighter elements upon their successive bombardment by the very high energy neutrons produced by the fusion of deuterium and tritium in the reactor. It was recently found by a study done at MIT, that only 2 or 3 fusion reactors with parameters similar to that of the International Thermonuclear Experimental Reactor (ITER) could transmute the entire annual minor actinide production from all of the light water reactors presently operating in the United States fleet while simultaneously generating approximately 1 gigawatt of power from each reactor[4].

Re-use of waste

Another option is to find applications of the isotopes in nuclear waste so as to re-use them.^[41] Already, caesium-137, strontium-90 and a few other isotopes are extracted for certain industrial applications such as food irradiation and radioisotope thermoelectric generators. While re-use does not eliminate the need to manage radioisotopes, it may reduce the quantity of waste produced.

The Nuclear Assisted Hydrocarbon Production Method,^[42] Canadian patent application 2,638,179, is a method for the temporary or permanent storage of nuclear waste materials comprising the placing of waste materials into one or more repositories or boreholes constructed into an unconventional oil formation. The thermal flux of the waste materials fracture the formation, alters the chemical and/or physical properties of hydrocarbon material within the subterranean formation to allow removal of the altered material. A mixture of hydrocarbons, hydrogen, and/or other formation fluids are produced from the formation. The radioactivity of high-level radioactive waste affords proliferation resistance to plutonium placed in the periphery of the repository or the deepest portion of a borehole.

Space disposal

Space disposal is an attractive notion because it permanently removes nuclear waste from the environment. However, it has significant disadvantages, not least of which is the potential for catastrophic failure of a launch vehicle. Furthermore, the high number of launches that would be required — due to the fact that no individual rocket would be able to carry very much of the material relative to the material needed to be disposed of—makes the proposal impractical (for both economic and risk-based reasons). To further complicate matters, international agreements on the regulation of such a program would need to be established. [5] This method would also be energetically intensive and thus is not necessarily economically feasible.

It has been suggested that through the use of a stationary launch system many of the risks of catastrophic launch failure could be avoided. A promising concept is the use of high power lasers to launch "indestructible" containers from the ground into space. Such a system would require no rocket propellant, with the launch vehicle's payload making up a near entirety of the vehicle's mass. Without the use of rocket fuel on board there would be little chance of the vehicle exploding.[6]

Another form of safe removal would possibly be the space elevator. Encasing the waste in glassified form inside a steel shell 9 inches (230 mm) thick, which in turn is tiled with shuttle tile to its exterior. If the launch vehicle fails just before reaching orbit, the waste ball will safely re-enter the earth's atmosphere. The steel shell would deform on impact, but would not rupture due to the density of the shell. Also, this would potentially allow the waste to be shot into the Sun.^[43]

National management plans

Most countries are considerably behind the United States in developing plans for high-level radioactive waste disposal. Sweden and Finland are furthest along in committing to a particular disposal technology, while many others reprocess spent fuel or contract with France or Great Britain to do it, taking back the resulting plutonium and high-level waste. “An increasing backlog of plutonium from reprocessing is developing in many countries... It is doubtful that reprocessing makes economic sense in the present environment of cheap uranium.”^[44]

In many European countries (e.g., Britain, Finland, the Netherlands, Sweden and Switzerland) the risk or dose limit for a member of the public exposed to radiation from a future high-level nuclear waste facility is considerably more stringent than that suggested by the International Commission on Radiation Protection or proposed in the United States. European limits are often more stringent than the standard suggested in 1990 by the International Commission on Radiation Protection by a factor of 20, and more stringent by a factor of ten than the standard proposed by the U.S. Environmental Protection Agency (EPA) for Yucca Mountain for the first 10,000 years after closure. Moreover, the U.S. EPA’s proposed standard for greater than 10,000 years is 250 times more permissive than the European limit.^[45]

Accidents involving radioactive waste

A number of incidents have occurred when radioactive material was disposed of improperly, shielding during transport was defective, or when it was simply abandoned or even stolen from a waste store.^[46] In the Soviet Union, waste stored in Lake Karachay was blown over the area during a dust storm after the lake had partly dried out.^[47] At Maxey Flat, a low-level radioactive waste facility located in Kentucky, containment trenches covered with dirt, instead of steel or cement, collapsed under heavy rainfall into the trenches and filled with water. The water that invaded the trenches became radioactive and had to be disposed of at the Maxey Flat facility itself. In other cases of radioactive waste accidents, lakes or ponds with radioactive waste accidentally overflowed into the rivers during exceptional storms.^{[citation needed]}

Scavenging of abandoned radioactive material has been the cause of several other cases of radiation exposure, mostly in developing nations, which may have less regulation of dangerous substances (and sometimes less general education about radioactivity and its hazards) and a market for scavenged goods and scrap metal. The scavengers and those who buy the material are almost always unaware that the material is radioactive and it is selected for its aesthetics or scrap value.^[48] Irresponsibility on the part of the radioactive material's owners, usually a hospital, university or military, and the absence of regulation concerning radioactive waste, or a lack of enforcement of such regulations, have been significant factors in radiation exposures. For an example of an accident involving radioactive scrap originating from a hospital see the Goiânia accident.^[48]

Transportation accidents involving spent nuclear fuel from power plants are unlikely to have serious consequences due to the strength of the spent nuclear fuel shipping casks.

In Italy, several radioactive waste deposits let material flow into river water, thus contaminating water fit for domestic use.^[49]

Diemazz

Contents